Percolation
April Brewer
The April Brewer is a Danish-designed pour over dripper with a flat-bottom brewing bed and steep interior walls, engineered for fast, even extraction . Developed by April Coffee Roaster s, it is designed to work with specific April filters and produces a clean , sweet, and highly clarified cup with emphasis on clarity and separation of flavors.
The April Brewer is a Danish-designed pour over dripper with a flat-bottom brewing bed and steep interior walls, engineered for fast, even extraction . Developed by April Coffee Roaster s, it is designed to work with specific April filters and produces a clean , sweet, and highly clarified cup with emphasis on clarity and separation of flavors.
The April Brewer is a Danish-designed pour over dripper with a flat-bottom brewing bed and steep interior walls, engineered for fast, even extraction. Developed by April Coffee Roasters, it is designed to work with specific April filters and produces a clean, sweet, and highly clarified cup with emphasis on clarity and separation of flavors.
Medium-fine (like table salt). Slightly finer than Kalita Wave due to the faster drawdown.
Water Temp
92 to 96 degrees Celsius (light roasts).
1:16 to 1:18 (e.g., 12g coffee to 192 to 216g water for one cup; 20g coffee to 320 to 360g for two cups).
Brew Time
2:30 to 3:15 total.
Filter Type
April proprietary filters (paper, flat-bottom with wave structure). Also compatible with Kalita Wave 155 filters.
History
The April Brewer was developed by Patrik Rolf and the team at April Coffee, a specialty coffee roaster based in Copenhagen, Denmark. Patrik Rolf is a renowned barista and competition figure, having placed second in the World Barista Championship. The April Brewer was designed to address perceived limitations of existing drippers: the V60's sensitivity to pouring technique, the Kalita Wave's restricted flow, and the inconsistency of flat-bottom designs with poor airflow. The April Brewer features a flat bottom with steep walls, two rows of small drainage holes, and is designed to be used with specific April filters (though compatible with Kalita Wave 155 filters). It was released in 2020 and has gained a following among specialty coffee enthusiasts for its fast, clean, and sweet brews.
Origin and Inventor
Patrik Rolf and April Coffee (Copenhagen, Denmark, 2020).
How It Works
The April Brewer is a flat-bottom dripper with steep interior walls and two rows of drainage holes at the base. The steep walls create a shallower coffee bed than wider flat-bottom drippers, which reduces the risk of channeling and promotes even extraction. The two rows of holes provide a moderate flow rate that is faster than the Kalita Wave but slower than the V60. The dripper is designed to be used with April's proprietary filters (or Kalita Wave 155), which have a specific wave structure for airflow. The April Brewer is typically brewed with a relatively fast drawdown (2 to 3 minutes), producing a clean, sweet cup with high flavor clarity.
The April Brewer's design promotes even, fast extraction. The flat bottom with steep walls creates a shallow, uniform coffee bed that reduces the depth-related channeling that can occur in deeper beds. The two rows of drainage holes provide a moderate, consistent flow rate. The shallow bed and fast drawdown mean that the extraction is primarily driven by the initial contact with hot water, emphasizing the bright, sweet, and aromatic compounds that extract early. The April filters' wave structure maintains airflow around the bed. The result is a cup with high clarity, where individual flavor notes are distinct and separated, rather than muddled together. This makes the April Brewer particularly well-suited for delicate, complex coffees like Ethiopian or Kenyan.
Ideal water for the April Brewer has a TDS of 50 to 100 ppm (slightly softer than average), general hardness of 30 to 60 ppm, and alkalinity of 20 to 40 ppm. The April team recommends slightly softer water to maximize clarity and sweetness. Softer water extracts fewer bitter compounds and allows the bright, sweet notes to shine. Water temperature should be 92 to 96 degrees Celsius for light roasts.
Brewing Recipes
April Single Cup
April's recommended recipe for maximum clarity, using a small dose.
- 1Pre-wet April filter, discard rinse water.
- 2Add 12g ground coffee, level the bed.
- 3Bloom: pour 36g water, wait 40 seconds.
- 4First pour: add water to 120g in slow circles, 20 seconds.
- 5Second pour: add water to 200g in slow circles, 20 seconds.
- 6Let drain, aiming for 2:45 total time.
- 7Swirl gently, serve.
April Two Cup
A larger recipe for two cups, maintaining the clarity-focused profile.
- 1Pre-wet filter, add 20g coffee.
- 2Bloom: pour 60g water, wait 40 seconds.
- 3First pour: add to 180g, 25 seconds.
- 4Second pour: add to 320g, 25 seconds.
- 5Let drain, target 3:00 total.
- 6Swirl and serve.
Flow Dynamics
Water flows through a shallow, flat coffee bed and exits through two rows of small holes. The steep walls and shallow bed promote even flow. The flow rate is moderate: faster than Kalita Wave, slower than V60.
Extraction Yield and Strength
Typical Extraction Yield: 19 to 22%.
Typical Strength (TDS): 1.15 to 1.35% TDS (slightly lower strength for clarity).
Common Mistakes
- •Grinding too coarse, which produces a weak, under-extracted cup given the fast drawdown
- •Pouring too slowly, which extends the brew time and muddies the clean, clarity-focused profile
- •Using too much coffee (too deep a bed), which counters the shallow bed design
- •Not pre-wetting the filter, introducing papery flavors
- •Using hard water, which reduces clarity and sweetness
- •Pouring water on the walls instead of the coffee bed, which bypasses extraction
Professional Tips
- •Use the April-recommended recipe: smaller doses (12g for one cup) with a 1:16 to 1:18 ratio for maximum clarity
- •Pour at a moderate to fast rate: the April is designed for faster brewing than the Kalita Wave
- •Use slightly softer water (50 to 100 ppm TDS) to maximize clarity and sweetness
- •Pre-wet the filter and pre-warm the dripper
- •Use 2 to 3 pours after the bloom for even extraction
- •Choose delicate, complex coffees (Ethiopian, Kenyan) to take advantage of the April's clarity
- •The April Brewer excels at separating flavor notes: use it for cupping-style clarity
Advanced Techniques
- •Single continuous pour for the fastest, brightest cup
- •Using smaller doses (10 to 12g) for maximum flavor separation and clarity
- •Adjusting water temperature up (95 to 96 degrees Celsius) for very light roasts to maximize extraction
- •Using April's specific water recipe (filtered water with added minerals) for optimal results
- •Comparing the same coffee brewed on the April vs. V60 to understand the effect of flat-bottom vs. conical extraction
Recommended Coffees
Recommended Roast Levels
Recommended Grinders
Common Myths
- •The April Brewer is just another Kalita Wave. In reality, the steep walls, two-row hole design, and recommended brewing parameters (smaller doses, faster pour, softer water) produce a significantly different cup profile focused on clarity.
- •The April requires April-specific filters. While April recommends their proprietary filters, the brewer is compatible with Kalita Wave 155 filters.
Cleaning
Rinse with hot water after each use. Discard filter and grounds. The plastic or ceramic body can be washed with mild soap and warm water. Handle ceramic version with care.
Maintenance
Check drainage holes periodically for clogs. Clean with a soft brush. Store in a dry place. The plastic version is durable; the ceramic version should be handled carefully to avoid chips.
Related Equipment
Related Encyclopedia Entries
Bypass
<h2>Technical Application and Refractometry</h2> In the application of the SCA Brewing Control Chart, the use of bypass facilitates a vertical movement downward (reducing strength) without a horizontal shift (increasing extraction). When utilizing a VST Precision Refractometer to verify results, a barista can ensure that the bypass has achieved the target TDS without shifting the EY. For instance, if a 1.0-liter brew yields a 1.55% TDS and the target is 1.30% TDS, adding approximately 192ml of bypass water will achieve the target. This technique is particularly effective for managing high-density African coffees where long contact times might otherwise lead to unwanted bitterness.
Brewing MethodsCoffee Bloom: Degassing in Freshly Roasted Coffee
The phenomenon is chemically driven by the rapid displacement of carbon dioxide (CO2) molecules trapped within the roasted bean's cellular matrix. During the roasting process, the Maillard reaction and Strecker degradation produce significant quantities of CO2, which remains sequestered until the application of hot water—ideally between 92°C and 96°C. This thermal energy lowers the viscosity of the trapped oils and increases the kinetic energy of the gas, resulting in the characteristic swelling of the coffee bed. <h2>Scientific Basis of Degassing</h2> The cellulose structure of the coffee bean acts as a pressurized vessel for gases. Upon saturation, water infiltrates the micropores of the grounds, forcing the gas outward. This displacement is critical because CO2 is naturally hydrophobic and creates a physical barrier that prevents water from reaching the soluble compounds. A successful bloom typically lasts 30 to 45 seconds and requires a water-to-coffee ratio of approximately 2:1 by weight.
Equipment & ToolsCoffee Roaster
The coffee roaster operates through three primary modes of heat transfer: conduction, convection, and radiation. Modern drum roasters typically utilize a 70:30 or 80:20 ratio of convection to conduction, respectively. Since the first industrial-scale drum roaster was patented by Elizabeth Dakin in 1848 and later refined by Alex van Gulpen in 1868, the mechanical engineering of these units has focused on thermal stability and airflow control. Internally, the roasting process triggers the Maillard reaction between 140°C and 165°C, followed by caramelization of sucrose at approximately 170°C. Advanced roasters incorporate variable frequency drives (VFD) for both drum speed and fan motor control, allowing operators to manipulate the Rate of Rise (RoR) precisely. Industrial units employ cyclone separators to isolate chaff and afterburners to mitigate Volatile Organic Compounds (VOCs) and particulates before exhaust. The thermodynamics within the drum involve complex fluid dynamics where air temperature (Environmental Temperature) and bean mass temperature (Bean Temperature) are monitored via J-type or K-type thermocouples. These sensors provide the data necessary for profiling software to track development in real-time.
Origins & GeographyEthiopian Coffee: The Birthplace of Arabica Coffee
Ethiopia is widely considered the birthplace of coffee, where the Coffea arabica plant originated in the highland forests of the southwest. Ethiopia remains one of the world's top coffee producers, known for extraordinary genetic diversity, distinctive regional cup profiles, and processing traditions that date back centuries. Regions like Yirgacheffe, Sidamo, Guji, and Harrar produce some of the most sought-after specialty coffees in the world, prized for their floral, citrus, and tea-like characteristics.
Coffee ScienceExtraction
Extraction is the process of dissolving soluble compounds from ground coffee into water, producing the beverage we know as coffee. During extraction, water pulls acids, sugars, lipids, carbohydrates, and melanoidins from the coffee grounds in a sequence that shapes flavor, body, and aroma.
Brewing MethodsPour Over
Pour over is a manual coffee brewing method in which hot water is poured over ground coffee in a filter, allowing gravity to draw the water through the grounds and into a vessel below. Common devices include the Hario V60, Chemex, Kalita Wave, and Melitta.
Coffee ScienceTDS (Total Dissolved Solids)
Total Dissolved Solids (TDS) is a measurement of the concentration of dissolved substances in brewed coffee, expressed as a percentage of the total mass. It is the primary metric used to calculate extraction yield and assess brew strength.
Brewing MethodsWater Temperature
Effective temperature management must account for 'slurry temperature'—the actual temperature of the coffee-water mixture—which typically measures 2°C to 5°C lower than the strike water in the kettle. This thermal loss is a result of the heat capacity of the brewing vessel and the dry coffee grounds. The Arrhenius equation provides a framework for understanding how the rate of extraction increases exponentially with temperature. Specifically, the solubility of caffeine and chlorogenic acids increases linearly with thermal energy, whereas the extraction of lipids and certain aromatic oils requires reaching specific thermal thresholds to overcome surface tension within the coffee grounds' porous structure.
Related Book Chapters
- •Chapter 1: Brewing Methods
- •Chapter 5: Extraction Science
Frequently Asked Questions
Sources
- •April Coffee
- •Patrik Rolf
- •Specialty Coffee Association
Continue Your Coffee Journey
Free resources and tools to deepen your knowledge.
The Complete World of Coffee
615 pages covering origins, brewing, science, and history in depth.
Learn More →Free Brewing Tools
Brewing calculators, ratio tools, and reference apps for home brewers.
Get Free Apps →Free Sample Chapter
Read a chapter from The Complete World of Coffee — no purchase required.
Read Free Chapter →Editorial Standards & Trust

Keith E. Lyons
Author, Researcher & Coffee Educator
Keith E. Lyons is the author of The Complete World of Coffee and the publisher behind Lyons Den Publishing. A licensed trauma therapist turned specialty coffee writer, Keith blends scientific rigor with genuine passion for the craft of coffee.
Last Reviewed
July 22, 2026
Sources & References
(3)Claims are cited to verifiable sources. Peer-reviewed research is marked.
- 1April Coffee
- 2Patrik Rolf
- 3Specialty Coffee Association
Authoritative References
Editorial Standards
- • Fact-checked against peer-reviewed coffee science research and industry standards.
- • Reviewed by the author with documented sources for every factual claim.
- • Updated regularly; the "Last Reviewed" date reflects the most recent verification.
- • Corrections are made promptly when new research or evidence emerges.
Our editorial process prioritizes accuracy, scientific rigor, and practical relevance for coffee enthusiasts and professionals alike.
Publisher
Lyons Den Publishing · Founded 2025 · San Diego, CA
Contact
lyonsdenpublishers@gmail.comIntelligent Recommendations
Computed in real time using semantic similarity across every page in the knowledge library.
Related Guides
Semantically similar content across the knowledge library.
Kalita Wave
The Kalita Wave is a Japanese <a href="/coffee-encyclopedia/pour-over">pour over</a> <a href="/brewing-methods/origami-dripper">dripper</a> distinguished by its flat-bottom brewing bed and three small drainage holes, producing a more forgiving and consistent brew than <a href="/brewing-methods/nextlevel-pulsar">conical</a> <a href="/brewing-methods/orea-dripper">dripper</a>s. The proprietary wave filters minimize contact with the <a href="/brewing-methods/april-brewer">dripper</a> walls, reducing heat loss and promoting even <a href="/coffee-encyclopedia/extraction">extraction</a>.
Orea Dripper
The Orea <a href="/brewing-methods/kalita-wave">Dripper</a> is an <a href="/brewing-methods/nextlevel-lattice">innovative</a> <a href="/coffee-science/flow-rate-and-permeability">pour over</a> <a href="/brewing-methods/origami-dripper">dripper</a> featuring a flat-<a href="/brewing-methods/april-brewer">bottom</a> design with a unique wave-structured interior and a proprietary polymer <a href="/coffee-science/extraction-yield-ey">material</a> that provides exceptional thermal stability. Its design promotes even <a href="/coffee-science/water-chemistry">extraction</a> through uniform bed depth, enhanced airflow, and heat retention, making it a favorite among competition baristas and specialty coffee enthusiasts.
Kalita Wave Pour Over Guide
Featuring a flat bed geometry and three-hole restricted flow base, the Kalita Wave dripper promotes even extraction across the entire ground coffee column. Wave filter ridges keep slurry away from outer walls, minimizing cold air contact.
Flow Rate and Permeability
Flow rate in coffee brewing refers to the speed at which water passes through the coffee bed. Flow rate is governed by Darcy's Law of fluid flow through porous media and is influenced by grind size, coffee bed depth, pressure, viscosity, and the permeability of the coffee puck. Understanding flow rate is essential for pour over consistency, espresso extraction time, and diagnosing brewing problems like channeling.
People Also Read
What other readers explored from this topic.
Kalita Wave Pour Over Guide
Featuring a flat bed geometry and three-hole restricted flow base, the Kalita Wave dripper promotes even extraction across the entire ground coffee column. Wave filter ridges keep slurry away from outer walls, minimizing cold air contact.
Flow Rate and Permeability
Flow rate in coffee brewing refers to the speed at which water passes through the coffee bed. Flow rate is governed by Darcy's Law of fluid flow through porous media and is influenced by grind size, coffee bed depth, pressure, viscosity, and the permeability of the coffee puck. Understanding flow rate is essential for pour over consistency, espresso extraction time, and diagnosing brewing problems like channeling.
Orea Dripper
The Orea dripper is a flat-bottom ceramic pour-over brewer designed for high-clarity extraction, known for its wide base, fast flow, and use with wave-style filters.
Clever Dripper Brewing Guide
The Clever Coffee Dripper combines full immersion steeping with paper filter drawdown through a patented stopper valve. This guide outlines water-first pouring protocols, grind selection, and steep timing for reliable repeatability.
Popular Articles
Most-read articles related to this page.
Specialty Coffee Explained: Origin, Flavor & Grading Guide
Dive deep into the world of specialty coffee. From understanding the 80-point SCA scale to mastering the nuances of single origin vs blends and roasting...
Is Coffee Healthy? Decoding the Complexities of Your Brew
Discover the truth about coffee and your health. Beyond simple labels, I dive into how bioactivity, dosage, and preparation methods influence your body in...
How Coffee Extraction Works: Extraction Yield, TDS, and the 18–22% Range
Coffee extraction is a solid–liquid process. This guide explains the difference between extraction yield and TDS, why the 18–22% range is a reference band rather than a rule, and how immersion, percolation, and espresso extraction differ.
What Are the Best Pour-Over Coffee Filters in 2026?
Find the right pour-over filter for your dripper. Compare flow rates, taste, cost, and paper vs. metal to brew a cleaner or fuller-bodied cup.
Continue Learning
Structured next steps in the same topic area.
Kalita Wave
The Kalita Wave is a Japanese <a href="/coffee-encyclopedia/pour-over">pour over</a> <a href="/brewing-methods/origami-dripper">dripper</a> distinguished by its flat-bottom brewing bed and three small drainage holes, producing a more forgiving and consistent brew than <a href="/brewing-methods/nextlevel-pulsar">conical</a> <a href="/brewing-methods/orea-dripper">dripper</a>s. The proprietary wave filters minimize contact with the <a href="/brewing-methods/april-brewer">dripper</a> walls, reducing heat loss and promoting even <a href="/coffee-encyclopedia/extraction">extraction</a>.
Orea Dripper
The Orea <a href="/brewing-methods/kalita-wave">Dripper</a> is an <a href="/brewing-methods/nextlevel-lattice">innovative</a> <a href="/coffee-science/flow-rate-and-permeability">pour over</a> <a href="/brewing-methods/origami-dripper">dripper</a> featuring a flat-<a href="/brewing-methods/april-brewer">bottom</a> design with a unique wave-structured interior and a proprietary polymer <a href="/coffee-science/extraction-yield-ey">material</a> that provides exceptional thermal stability. Its design promotes even <a href="/coffee-science/water-chemistry">extraction</a> through uniform bed depth, enhanced airflow, and heat retention, making it a favorite among competition baristas and specialty coffee enthusiasts.
Tricolate
The <a href="/brewing-methods/origami-dripper">Tricolate</a> is a <a href="/brewing-methods/kalita-wave">precision pour</a> over <a href="/brewing-methods/nextlevel-lattice">dripper</a> <a href="/brewing-methods/april-brewer">designed</a> in Australia, featuring a flat-bottom bed, an integrated showerhead <a href="/coffee-science/water-chemistry">water</a> distributor, and a <a href="/coffee-encyclopedia/bypass">bypass</a> channel that eliminates the need for a gooseneck kettle. Its engineering-focused design aims to remove as many variables as possible from the <a href="/coffee-science/flow-rate-and-permeability">pour over</a> <a href="/coffee-encyclopedia/extraction">process</a>, making consistently excellent coffee accessible to anyone.
Origami Dripper
The <a href="/brewing-methods/nextlevel-lattice">Origami</a> <a href="/brewing-methods/kalita-wave">Dripper</a> is a ceramic pour over <a href="/brewing-methods/orea-dripper">dripper</a> from Japan, named for its folded, origami-like exterior. Its unique 20-rib design <a href="/coffee-science/water-chemistry">creates</a> channels for airflow between the filter and the <a href="/brewing-methods/tricolate">dripper</a> walls, and its conical shape accommodates both V60-style conical filters and Kalita-style flat-bottom filters, making it one of the most versatile <a href="/brewing-methods/pour-over-v60">dripper</a>s available.
Recommended Encyclopedia Entries
Reference definitions that complement this page.
Kalita Wave Pour Over Guide
Featuring a flat bed geometry and three-hole restricted flow base, the Kalita Wave dripper promotes even extraction across the entire ground coffee column. Wave filter ridges keep slurry away from outer walls, minimizing cold air contact.
Orea Dripper
The Orea dripper is a flat-bottom ceramic pour-over brewer designed for high-clarity extraction, known for its wide base, fast flow, and use with wave-style filters.
Clever Dripper Brewing Guide
The Clever Coffee Dripper combines full immersion steeping with paper filter drawdown through a patented stopper valve. This guide outlines water-first pouring protocols, grind selection, and steep timing for reliable repeatability.
Steep And Release Brewing
Steep and release brewing combines full immersion contact time with paper filter clarity through manual valve drippers like the Hario Switch and Clever Dripper. This guide outlines steep timing, agitation control, and drawdown mechanics.
Free Brewing Tools