Skip to content

Holiday: 10% off + free U.S. shipping + free gift wrap on The Complete World of Coffee — gift it here

Hybrid

Pulsar Brewer

Quick Answer

The Pulsar Brewer is an innovative hybrid brewing device that combines percolation and immersion brewing through a patented valve system. It allows the brewer to switch between pour over (percolation) and immersion modes during a single brew, offering unprecedented control over extraction and enabling techniques impossible with any single-mode dripper.

Summary

The Pulsar Brewer is an innovative hybrid brewing device that combines percolation and immersion brewing through a patented valve system. It allows the brewer to switch between pour over (percolation) and immersion modes during a single brew, offering unprecedented control over extraction and enabling techniques impossible with any single-mode dripper.

Sources: Pulsar Brewing; Specialty Coffee Association

The Pulsar Brewer is an innovative hybrid brewing device that combines percolation and immersion brewing through a patented valve system. It allows the brewer to switch between pour over (percolation) and immersion modes during a single brew, offering unprecedented control over extraction and enabling techniques impossible with any single-mode dripper.

Grind Size

Medium (works well with a range of grind sizes due to dual-mode extraction)

Water Temp

92 to 96 degrees Celsius (198 to 205 degrees Fahrenheit)

Brew Ratio

1:15 to 1:17 (coffee to water by weight)

Brew Time

2.5 to 4 minutes (depending on mode switching strategy)

Filter Type

Flat-bottom paper filter (compatible with Kalita Wave filters)

History

The Pulsar Brewer was developed as a next-generation brewing device that addresses the limitations of both pure percolation (pour over) and pure immersion brewing. The design team recognized that different phases of extraction benefit from different brewing modes: initial wetting and degassing benefit from immersion, while later extraction benefits from percolation. The Pulsar's patented valve allows the brewer to switch between modes during a single brew, creating a hybrid extraction profile. Since its release, the Pulsar has gained attention among coffee enthusiasts and competition baristas for its innovative approach to extraction control.

Origin and Inventor

Pulsar Brewing

How It Works

The Pulsar Brewer features a flat-bottom dripper with a patented valve at the bottom that can be opened (percolation/pour over mode) or closed (immersion mode). In immersion mode, the valve is closed and water and coffee steep together, similar to a Clever Dripper. In percolation mode, the valve is open and water flows through the coffee bed, similar to a pour over. The brewer can switch between modes during a single brew: for example, starting with immersion for the bloom, then opening the valve for percolation extraction. This hybrid approach allows the brewer to optimize different phases of extraction. The flat-bottom design ensures even extraction in both modes.

The Pulsar's hybrid extraction combines the strengths of immersion and percolation. Immersion extraction is more even and forgiving, as all coffee is in contact with water simultaneously, and the extraction rate naturally decreases as the water saturates. This is ideal for the initial bloom phase, where degassing and even wetting are important. Percolation extraction is more efficient at extracting later-stage compounds, as fresh water continuously passes through the coffee bed. By combining both modes, the Pulsar can achieve a more complete and balanced extraction than either mode alone. The flat-bottom design ensures even extraction in both modes. The valve allows precise control over when each mode is used, enabling advanced extraction profiling.

Use filtered water with a TDS of 75 to 150 ppm and calcium hardness of 40 to 70 ppm. The Pulsar's hybrid extraction is relatively forgiving of water chemistry, as the immersion phase provides even contact and the percolation phase provides efficient extraction. Aim for general hardness of 50 to 100 ppm and alkalinity of 30 to 50 ppm. Good water quality still matters for optimal results.

Brewing Recipes

Hybrid Immersion-Percolation Recipe

Temp:94 degrees C
Time:3:00
  1. 1Place a flat-bottom paper filter in the Pulsar. Rinse with hot water. Discard rinse.
  2. 2Close the valve (immersion mode). Add 15g of medium-ground coffee.
  3. 3Bloom: Pour 30g of water. Stir gently. Wait 45 seconds in immersion mode.
  4. 4Open the valve (percolation mode). Pour to 150g in a steady spiral.
  5. 5At 1:45, pour to 250g total.
  6. 6Allow to draw down in percolation mode. Target total brew time of 3:00.
  7. 7Serve.

Full Immersion Recipe

Temp:94 degrees C
Time:3:30
  1. 1Place filter in Pulsar. Rinse. Discard rinse.
  2. 2Close valve (immersion mode). Add 15g coffee.
  3. 3Pour 250ml water. Stir gently.
  4. 4Steep for 3 minutes with valve closed.
  5. 5At 3:00, open the valve. Allow to drain.
  6. 6Drawdown takes approximately 30 seconds. Total time 3:30.
  7. 7Serve.

Flow Dynamics

In immersion mode (valve closed), water and coffee sit together with no flow, similar to a Clever Dripper. In percolation mode (valve open), water flows through the coffee bed by gravity, similar to a pour over. The brewer can switch between modes during a single brew by opening or closing the valve. The flat-bottom design ensures even extraction in both modes. The valve provides precise control over the transition between modes.

Extraction Yield and Strength

Typical Extraction Yield: 19 to 22%

Typical Strength (TDS): 1.2 to 1.5% TDS

Common Mistakes

  • •Forgetting to close the valve before adding water in immersion mode, causing premature drainage
  • •Forgetting to open the valve for percolation phase, causing overflow
  • •Using a grind that is too fine for percolation mode, causing stalling
  • •Not rinsing the paper filter, leaving a papery taste
  • •Not preheating the dripper, causing heat loss
  • •Switching modes at the wrong time, which can disrupt extraction
  • •Pouring too aggressively in percolation mode, causing channeling

Professional Tips

  • •Experiment with different mode-switching strategies: immersion for bloom, percolation for main extraction; or full immersion for consistency
  • •Use immersion mode for the bloom to ensure even wetting and degassing
  • •Use percolation mode for the main extraction to achieve higher extraction efficiency
  • •Use a gooseneck kettle for percolation mode; not needed for immersion mode
  • •Weigh your water input with a 0.1g scale for consistency
  • •The flat-bottom design is forgiving of pour technique in percolation mode
  • •Preheat the dripper by rinsing with hot water
  • •The Pulsar is excellent for testing how different extraction modes affect the same coffee

Advanced Techniques

  • •Multi-mode brewing: switching between immersion and percolation multiple times during a single brew
  • •Extended immersion for maximum even extraction
  • •Pulse percolation after initial immersion for complex extraction profiles
  • •Temperature profiling: using different temperatures in immersion vs. percolation phases
  • •Grind profiling: testing different grind sizes for each mode
  • •Cold brew adaptation: using immersion mode with cold water for extended steeping

Recommended Coffees

Ethiopian YirgacheffePanamanian GeishaColombian WashedKenyan AABrazilian Cerrado

Recommended Roast Levels

LightLight-MediumMedium

Recommended Grinders

Comandante C40Baratza Encore1Zpresso J-MaxFellow Ode

Common Myths

  • •Myth: The Pulsar is just a Clever Dripper with a different design. Reality: The Pulsar's ability to switch between immersion and percolation during a single brew makes it fundamentally different from the Clever Dripper, which only does immersion.
  • •Myth: Hybrid brewing is a gimmick. Reality: The ability to use different extraction modes for different phases of the brew provides genuine control over extraction that single-mode brewers cannot achieve.
  • •Myth: The Pulsar is too complicated for everyday use. Reality: While it offers advanced features, the Pulsar can be used as a simple immersion dripper (like the Clever) for everyday brewing, with the option to use percolation mode for more control.

Cleaning

After brewing, discard the used filter and grounds. Rinse the dripper and valve with warm water. Clean the valve mechanism carefully to remove any coffee grounds or oils. Wash with mild dish soap if needed. Dry thoroughly before storing. Ensure the valve moves freely before storing.

Maintenance

Check the valve mechanism regularly for coffee grounds or debris that could affect the seal. Clean the valve area with a soft brush. The valve seal may wear over time; replace if it leaks. Use only compatible flat-bottom filters. Store in a dry place.

Related Equipment

Clever DripperHario SwitchKalita WaveHario V60April BrewerGooseneck Kettle

Related Encyclopedia Entries

Brewing Methods

Coffee Bloom Explained: CO2 Release During Brewing

The bloom is the rapid release of carbon dioxide gas from freshly ground coffee when it first contacts hot water. This degassing causes the coffee bed to swell and bubble, and is most visible during the first 30 to 45 seconds of a pour over brew.

Brewing Methods

Coffee Bloom: Degassing in Freshly Roasted Coffee

The phenomenon is chemically driven by the rapid displacement of carbon dioxide (CO2) molecules trapped within the roasted bean's cellular matrix. During the roasting process, the Maillard reaction and Strecker degradation produce significant quantities of CO2, which remains sequestered until the application of hot water—ideally between 92°C and 96°C. This thermal energy lowers the viscosity of the trapped oils and increases the kinetic energy of the gas, resulting in the characteristic swelling of the coffee bed. <h2>Scientific Basis of Degassing</h2> The cellulose structure of the coffee bean acts as a pressurized vessel for gases. Upon saturation, water infiltrates the micropores of the grounds, forcing the gas outward. This displacement is critical because CO2 is naturally hydrophobic and creates a physical barrier that prevents water from reaching the soluble compounds. A successful bloom typically lasts 30 to 45 seconds and requires a water-to-coffee ratio of approximately 2:1 by weight.

Origins & Geography

Ethiopian Coffee: The Birthplace of Arabica Coffee

Ethiopia is widely considered the birthplace of coffee, where the Coffea arabica plant originated in the highland forests of the southwest. Ethiopia remains one of the world's top coffee producers, known for extraordinary genetic diversity, distinctive regional cup profiles, and processing traditions that date back centuries. Regions like Yirgacheffe, Sidamo, Guji, and Harrar produce some of the most sought-after specialty coffees in the world, prized for their floral, citrus, and tea-like characteristics.

Coffee Science

Extraction

Extraction is the process of dissolving soluble compounds from ground coffee into water, producing the beverage we know as coffee. During extraction, water pulls acids, sugars, lipids, carbohydrates, and melanoidins from the coffee grounds in a sequence that shapes flavor, body, and aroma.

Brewing Methods

Pour Over

Pour over is a manual coffee brewing method in which hot water is poured over ground coffee in a filter, allowing gravity to draw the water through the grounds and into a vessel below. Common devices include the Hario V60, Chemex, Kalita Wave, and Melitta.

Related Book Chapters

  • •Chapter 6: Brewing Methods
  • •Chapter 7: Hybrid Brewing
  • •Chapter 5: Extraction Science
Learn more about The Complete World of Coffee →

Frequently Asked Questions

Sources

  • •Pulsar Brewing
  • •Specialty Coffee Association

Continue Your Coffee Journey

Free resources and tools to deepen your knowledge.

Editorial Standards & Trust

Keith E. Lyons

Keith E. Lyons

Author, Researcher & Coffee Educator

Keith E. Lyons is the author of The Complete World of Coffee and the publisher behind Lyons Den Publishing. A licensed trauma therapist turned specialty coffee writer, Keith blends scientific rigor with genuine passion for the craft of coffee.

Author of The Complete World of Coffee (615 pages)Licensed trauma therapist — brings research methodology and scientific rigor to coffee writingIndependent publisher, founder of Lyons Den Publishing

Last Reviewed

August 10, 2026

Sources & References

(2)

Claims are cited to verifiable sources. Peer-reviewed research is marked.

  1. 1
    Pulsar Brewing
  2. 2
    Specialty Coffee Association

Editorial Standards

  • • Fact-checked against peer-reviewed coffee science research and industry standards.
  • • Reviewed by the author with documented sources for every factual claim.
  • • Updated regularly; the "Last Reviewed" date reflects the most recent verification.
  • • Corrections are made promptly when new research or evidence emerges.

Our editorial process prioritizes accuracy, scientific rigor, and practical relevance for coffee enthusiasts and professionals alike.

Publisher

Lyons Den Publishing · Founded 2025 · San Diego, CA

Part of: Brewing Methods

Intelligent Recommendations

Computed in real time using semantic similarity across every page in the knowledge library.

Related Guides

Semantically similar content across the knowledge library.

Percolation

NextLevel Pulsar

The NextLevel <a href="/brewing-methods/pulsar-brewer">Pulsar</a> is an innovative <a href="/brewing-methods/clever-dripper">pour over</a> <a href="/coffee-science/temperature-and-extraction">dripper</a> that combines features of conical and flat-bottom designs with a unique valve system for controlled immersion and percolation. Developed through Kickstarter in 2021, it allows brewers to <a href="/brewing-methods/hario-switch">switch</a> between immersion and <a href="/brewing-methods/kalita-wave">pour over</a> modes mid-brew, offering unprecedented control over <a href="/coffee-encyclopedia/extraction">extraction</a>.

Immersion

Hario Switch

The <a href="/brewing-methods/pulsar-brewer">Hario Switch</a> is a hybrid immersion-percolation dripper that combines the V60 cone shape with a <a href="/brewing-methods/nextlevel-pulsar">switch</a>-activated valve at the base. In closed mode, it functions as an immersion brewer (like a <a href="/brewing-methods/clever-dripper">Clever Dripper</a>); in open mode, it functions as a <a href="/coffee-science/water-chemistry">standard</a> V60 pour over. This dual functionality allows brewers to switch between immersion and percolation during a single brew.

Brewing Methods

Clever Dripper Brewing Guide

The Clever Coffee Dripper combines full immersion steeping with paper filter drawdown through a patented stopper valve. This guide outlines water-first pouring protocols, grind selection, and steep timing for reliable repeatability.

Brewing Methods

Steep And Release Brewing

Steep and release brewing combines full immersion contact time with paper filter clarity through manual valve drippers like the Hario Switch and Clever Dripper. This guide outlines steep timing, agitation control, and drawdown mechanics.

People Also Read

What other readers explored from this topic.

Popular Articles

Most-read articles related to this page.

Continue Learning

Structured next steps in the same topic area.

Percolation

NextLevel Pulsar

The NextLevel <a href="/brewing-methods/pulsar-brewer">Pulsar</a> is an innovative <a href="/brewing-methods/clever-dripper">pour over</a> <a href="/coffee-science/temperature-and-extraction">dripper</a> that combines features of conical and flat-bottom designs with a unique valve system for controlled immersion and percolation. Developed through Kickstarter in 2021, it allows brewers to <a href="/brewing-methods/hario-switch">switch</a> between immersion and <a href="/brewing-methods/kalita-wave">pour over</a> modes mid-brew, offering unprecedented control over <a href="/coffee-encyclopedia/extraction">extraction</a>.

Immersion

Hario Switch

The <a href="/brewing-methods/pulsar-brewer">Hario Switch</a> is a hybrid immersion-percolation dripper that combines the V60 cone shape with a <a href="/brewing-methods/nextlevel-pulsar">switch</a>-activated valve at the base. In closed mode, it functions as an immersion brewer (like a <a href="/brewing-methods/clever-dripper">Clever Dripper</a>); in open mode, it functions as a <a href="/coffee-science/water-chemistry">standard</a> V60 pour over. This dual functionality allows brewers to switch between immersion and percolation during a single brew.

Immersion

Clever Dripper

The Clever Coffee <a href="/brewing-methods/pour-over-v60">Dripper</a> is a <a href="/brewing-methods/pulsar-brewer">hybrid</a> <a href="/brewing-methods/hario-switch">immersion</a>-percolation <a href="/brewing-methods/ceado-eazyt">device</a> that combines the ease of a <a href="/brewing-methods/french-press">French press</a> with the cleanliness of <a href="/brewing-methods/nextlevel-pulsar">pour over</a>. Coffee steeps in the dripper like a French <a href="/brewing-methods/espro-press">press</a>, then a valve releases the brew through a paper filter into a cup below, <a href="/coffee-encyclopedia/extraction">producing</a> a clean, full-bodied cup with minimal sediment.

Percolation

Orea Dripper

The Orea <a href="/brewing-methods/kalita-wave">Dripper</a> is an <a href="/brewing-methods/nextlevel-lattice">innovative</a> <a href="/coffee-science/flow-rate-and-permeability">pour over</a> <a href="/brewing-methods/origami-dripper">dripper</a> featuring a flat-<a href="/brewing-methods/april-brewer">bottom</a> design with a unique wave-structured interior and a proprietary polymer <a href="/coffee-science/extraction-yield-ey">material</a> that provides exceptional thermal stability. Its design promotes even <a href="/coffee-science/water-chemistry">extraction</a> through uniform bed depth, enhanced airflow, and heat retention, making it a favorite among competition baristas and specialty coffee enthusiasts.

Recommended Encyclopedia Entries

Reference definitions that complement this page.

The Complete World of Coffee

615 pages. 14 chapters. The definitive guide to specialty coffee.

Review the Book